Inflatables

① fill with solder bearings of the burn, using a knife to repair scratch with normal to use.  piston rod group can be extracted, so that the cylinder does not work. However, it must be removed and the cylinder 2-valve tappet adjustment bolt, so that valves remain closed and the cylinder hole of the connecting rod journal to plug, so as to avoid leakage of oil and other bearings burned.

2,
 
Burn cylinder liner

① Department burned together into a small mouth, the line filled with asbestos. ② burned area is larger, can be used the same parts of the cylinder liner cut a supplement; or cut and burned part of an area of the shape do the same leather (belt), its thickness should be consistent with the original liner, and then mats in the burned-out offices, carefully folded so that a good beating. ③ If the burn is in between the two cylinders needed to be asbestos-line or leather with packed.
 
In the spark plug thread around the dental pad or blind percutaneous  and then spin-hole can be seated.
 
Will be removed off the spring, put the two in turn enable the use of plane relative loading complex; such as spring break into several sections of the cylinder valve tappet adjustment bolt removed, so that valve remain closed.
 

Measuring stick is used the depth of holes, if the hole has not yet been through the cylinder, available locking the mouth can be strict.
 

With tapered wood plug the orifice, if the lack of oil available for cotton seed oil, peanut oil, soybean oil, rapeseed oil and other vegetable oils in place of, but back to the market should be thoroughly and check the engine oil inside and then replaced with new ones.